.png?w=100&itok=GQIWsvUV)
.png?crop=yes&k=c&w=125&h=125)
.png?crop=yes&k=c&w=125&h=125)
.png?crop=yes&k=c&w=125&h=125)
$ 399.00
Price correct as of 3rd November 2025, 08:30am.
This page is for product information only and item/s may be unavailable for purchase, contact your local Bunnings store for availability/price.
The AEG FUSION STEALTH Impact Driver delivers high torque and low sound levels in a compact and lightweight design. It’s up to 50% quieter* than the previous model (A18FID). Good news when working in enclosed spaces (under houses, in roof spaces, in cabinets), where sound is amplified.
The innovative hydraulic powertrain produces low vibration and steady, extended torque output compared to standard models. Unlike a traditional hammer and anvil mechanism, the hydraulic powertrain delivers torque through the rapid expansion and compression of hydraulic fluid.
With a short body design (only 114mm long), the Impact Driver is easy to operate in tight spaces.
The brushless motor generates a maximum 3,000ipm to drive large screws faster into dense materials.
The 4-mode selector provides enhanced control to drive different fasteners and work on various materials (Speed 1 maximum - 700rpm, speed 2 maximum - 1,800rpm, speed 3 - maximum 2,300rpm). Self-tapping mode produces a maximum 1,900rpm to drive smaller, tek screws into metal without overdriving them.
The quick-release ¼ (6.35mm) hex collet enables fast bit changes.
An in-built tri-beam LED illuminates dark work areas.
This Impact Driver is compatible with any AEG 18V Battery (sold separately).
*Test performed to ISO3744:2010 standard, measurements taken while driving screws at high speed. Test performed on 31st July 2025 vs Standard Impact Driver (A18FID).
The innovative hydraulic powertrain produces low vibration and steady, extended torque output compared to standard models. Unlike a traditional hammer and anvil mechanism, the hydraulic powertrain delivers torque through the rapid expansion and compression of hydraulic fluid.
With a short body design (only 114mm long), the Impact Driver is easy to operate in tight spaces.
The brushless motor generates a maximum 3,000ipm to drive large screws faster into dense materials.
The 4-mode selector provides enhanced control to drive different fasteners and work on various materials (Speed 1 maximum - 700rpm, speed 2 maximum - 1,800rpm, speed 3 - maximum 2,300rpm). Self-tapping mode produces a maximum 1,900rpm to drive smaller, tek screws into metal without overdriving them.
The quick-release ¼ (6.35mm) hex collet enables fast bit changes.
An in-built tri-beam LED illuminates dark work areas.
This Impact Driver is compatible with any AEG 18V Battery (sold separately).
*Test performed to ISO3744:2010 standard, measurements taken while driving screws at high speed. Test performed on 31st July 2025 vs Standard Impact Driver (A18FID).
